Protecting exterior wood surfaces has never been easier. TWP 100 Series resists the absorption of water, is not prone to mold or mildew, aids in color retention and preserves wood from turning gray. This penetrating stain enhances the woods tones for a more natural look. Whether you need to restore your log home, refinish your deck, stain a new fence or other hardwoods TWP has the solution.

Recommended Application Methods

Brush
Airless sprayer

Surface Preparation

Surface must be clean and dry
Do not use steel wool or wire brush, Osborn brush recommended
Mildew and mold free
Do not use products containing chlorine bleach

Application Temperature

45° to 80°F

Special Instructions

Back-brushing required for optimal results
Agitate product every 15 minutes
Maintain a "wet edge" to avoid lap marks
Avoid applying product in direct sunligh

Dry Time

Dry to the touch in four to twenty-four hours
Complete cure time may take 72 hours depending on humidity and temperature.

Coverage Rate

100 - 200 square feet per gallon

Please Note: TWP 100 Series is not VOC compliant within all 50 states or Canada. TWP 100 Series cannot be shipped or used within: California, Colorado, Connecticut, Rhode Island, Maine, Massachusetts, New Hampshire, Vermont, Delaware, District of Columbia, Maryland, New Jersey, New York, Northern VA, Pennsylvania, Parts of Arizona, Ohio, Illinois, Indiana, all of Canada. Orders from these areas will be cancelled and charged a 5% cancellation fee.