Round Backer Rod
Closed Cell Cylindrical Backer Rod
Don’t let the irregularity of your logs make you fret. Round Backer Rod can conform to your log to give you a tight seal between the log and the chinking. Backer Rod is perfect for your logs because it is able compress and flex to fit your unique logs.
Recommended Application Methods
Backer rod inserter kit
Spatula
Surface Preparation
Surface dry
Surface clean of dirt, wax, or oils
Any old sealant removed
Application Temperature
40° to 90°F
How To Install Backer Rod
Recommended Application Methods
Backer rod inserter kit
Spatula
Surface Preparation
Surface dry
Surface clean of dirt, wax, or oils
Any old sealant removed
Application Temperature
40° to 90°F
How To Install Backer Rod
- Clean the gap or joint thoroughly, removing any dirt, debris, or old sealant.
- Choose the right size of backer rod for the gap or joint, making sure it fits snugly but not too tight.
- Insert the Round Backer Rod into the gap or joint, using a blunt tool or your fingers to push it in evenly.
- Check that the Round Backer Rod is inset from the surface. Adjust the length if needed.
- Apply the sealant or caulking over the backer rod
- Smooth and shape the sealant or caulking with a wet finger or a caulking tool, removing any excess or air pockets.
- Let the sealant or caulking dry and cure according to the manufacturer's instructions.
Round Closed Cell Polyethylene Backer Rod
$9.95
You may also like
Send us a message to get the answer by email
Visit our store location
6528 Schamber Dr.
Norton Shores, MI 49444
