Keeping your log home clean is key for the longevity of the appearance and durability of the finish. Need a simple solution? Look no further than Log Wash. Log Wash is capable of removing the toughest dirt and grime without damaging wood or wood finishes. Very commonly used chlorine bleach cleaning solutions are not nearly as effective and tend to damage wood fibers. With a balanced pH, Log Wash is compatible with all Lifeline stains and topcoats. Recommended use once or twice yearly.

Recommended Application Methods

Pump sprayer

Surface Preparation

Surface must be wet
Do not use products containing chlorine bleach

Application Temperature

40° to 90°F

Special Instructions

Wet surface before applying
Let Log Wash to sit for 5 - 15 minutes before rinsing
*Do not allow Log Wash to dry on surface
Rinse off foliage as soon as possible to avoid damage

Dilution Rate

Maintenance Cleaning
1 cup concentrate per gallon of water makes 16 gallons
Stain Preparation
2 cup concentrate per gallon of water makes 8 gallons

Coverage Rate

150 - 200 square feet per gallon after dilution

Dry Time

Complete dry time AFTER rinsing may take 24 hours depending on humidity and temperature.