Textured Log Sealant
Energy Seal was made explicitly to seal scribed or milled log homes, log siding homes and around joinery, for example, butt-joints, trim, and corners. A single application makes any log structure totally climate tight.
Energy Seal has phenomenal stretch and adhesion to bare or stained log surfaces. It is enduring, UV-steady and synthetic safe.
Not at all like commonly used sealants which look out of place and shiny, Energy Seal is engineered to compliment the visual characteristics of wood. It applies to a smooth, capable finish, for all intents and purposes disappearing into the seams after it is applied. It blends into the lines on log walls and accepts the color of wood finishes. In fact, Energy Seal so closely matches your walls, most people cannot tell the seams are sealed.
Application is a snap by the professional or homeowner alike. We stock a full line of colors and quantities to get you through your project.
Recommended Application Methods
Bulk loading caulk gun and follower plate
Ratcheting caulk gun
Grip-Strip or other recommended backer rod
Surface clean of dirt, wax, or oils
40° to 90°F
Finished thickness should be approximately 3/8"
Avoid applying product in direct sunlight
Dry to the touch in one - two hours
Complete cure time may take 3-8 weeks depending on humidity and temperature.
Size Equivalency Comparison
Pail = 1
30 oz. tubes = 20 per pail
11 oz. tubes = 55 per pail
Perma Chink Energy Seal Textured Sealant