CPR Log Cleaner is a gentle yet powerful cleaning solution that uses an oxygenated bleach formula to clean and brighten bare logs and wood surfaces. Ideal for preparing your logs for staining or performing routine maintenance, CPR removes mildew, mold, fungus, and other surface contaminants without weakening wood fibers.

Key Features:

• Safe and Effective Cleaning: The oxygenated bleach formula safely cleans and brightens wood surfaces, removing dirt, mold, and mildew while preserving the integrity of the wood.
• Prepares Wood for Staining: Ideal for use before staining, CPR helps prepare your logs for a fresh coat of stain by creating a clean surface for better adhesion.
• Gentle on Wood: Does not weaken wood fibers, ensuring the longevity and strength of your logs while providing a deep clean.

Important Usage Notes:

• Not for High-Tannin Woods: CPR is NOT recommended for use on high-tannin woods, such as Redwood, due to potential discoloration. Always test in an inconspicuous area before full application to ensure compatibility.

Recommended Application Methods

Brush
Airless sprayer

Surface Preparation

Surface must be clean and dry
Do not use steel wool or wire brush, Osborn brush recommended
Mildew and mold free
Do not use products containing chlorine bleach

Application Temperature

60° to 90°F

Mixing Ratios

*Ensure mixing container is clean

Special Instructions

Avoid applying in direct sunlight
Start at bottom and work full length of wall 2 - 5 logs high
Allow solution to sit for roughly 5 - 20 minutes before washing off
Do NOT allow solution to dry on wood
Use within 4 hours of initial mixing for best results

Dry Time

Dry to the touch in four to six hours
Complete cure time may take 72 hours depending on humidity and temperature.

Coverage Rate

100 - 150 square feet per gallon