Professionals rely on S-100 as their go-to finish remover to strip away coatings and start fresh. S-100 is a water-based solvent that is simple to use and can effectively eliminate most types of finishes, including oil or water-based ones! S-100 comes in a gel form and can be applied using a brush or pressure washer. Once it has loosened the existing finish, all you need to do is pressure wash it away . In addition, you won't have to worry about harming the surrounding soil, as S-100 is biodegradable.

Recommended Application Methods

Brush
Pressure Washer (500 - 600 psi)

Surface Preparation

Surface must be clean and dry

Application Temperature

40° to 90°F

Special Instructions

Apply from bottom to top
Rinse from top to bottom
Rinse thoroughly

Dry Time

Dry to the touch in four to six hours
Complete cure time may take 72 hours depending on humidity and temperature.

Coverage Rate

50 - 100 square feet per gallon