The Q8 log oil is an exterior wood preservative registered with the EPA, specifically designed to control organisms (and mold, termites, beetles) that cause decomposition in log houses and wood paneling. Outlast Q8 log oil provides unsurpassed water-repellent and transparent single-layer trans-oxide paint. Outlast Q8 log oil is a completely exterior treatment that does not create a film and will never crack or peel. The trans-oxide pigment system provides excellent UV control that acts as a sunscreen to slow down the grayness of wood and fade. The solution melts in the wood to provide protection, not only on the surface, but also deep in the structure of the wood cells. Outlast Q8 log oil offers unique flexibility in terms of application temperature range, moisture content in logs and mode of transport. Outlast Q8 log oil meets national VOC requirements. Made in the USA

Outlast Q8 Log Oil should be applied as a single coat initially due to its rapid water repellency, which prevents multiple coats until several years later. Additional coats are recommended every 4-8 years as needed. The oil appears dark at first but lightens to its true color within 48 hours. Caulking or chinking with urethane can be done after 30 days, but with water-based products, it's advisable to wait 60 days in warm weather and 90 days in cooler conditions.

Recommended Application Methods

Brush
Pump Sprayer

Surface Preparation

Surface must be clean and dry
Do not use steel wool or wire brush, Osborn brush recommended
Mildew and mold free
Do not use products containing chlorine bleach

Application Temperature

50° to 90°F

Special Instructions

Back-brushing required for optimal results
Agitate product every 15 minutes
Maintain a "wet edge" to avoid lap marks
Avoid applying product in direct sunlight

Dry Time

Dry to the touch in four to six hours
Complete cure time may take 2 weeks depending on humidity and temperature.

Coverage Rate

125 - 175 square feet per gallon