Rotted and/or decaying logs are something that every log home owner worries about. Abatron’s WoodEpox is the shrink-free adhesive putty compound that professionals and DIYers turn to. WoodEpox is ideal for repairing, replacing, or adding to existing wood, as well as dried out/rotted or spongy woods consolidated with Liquid Wood. With the science to back it up, WoodEpox can handle nearly any wood repair problem that it’s packed into, bonding permanently to most surfaces, cracks, or holes. WoodEpox is the go-to wood filler due to its ability to be dyed, painted, stained, wood-grained, sawed, nailed, planed, sanded, carved, and machines like real wood. WoodEpox is flexible and malleable when mixed but turns solid once cured.

Mix WoodEpox with Abatron’s Dry Pigments to make your own color!

Recommended Application Methods

Putty Knife
Trowel

Surface Preparation

Surface must be clean and dry
Do not use steel wool or wire brush, Osborn brush recommended
Remove any oil based products
LiquidWood applied on soft, spongy, or rotten wood

Application Temperature

50° to 90°F

Special Instructions

Wait at least 24 hours before sanding and painting
Isopropyl alcohol will aid in smoothing
Mix thoroughly!

Dry Time

Hardens in one to three hours.
Pot life at 75 degrees is around 20 minutes
     *Can be accelerated by heating and slowed by cooling

Coverage Rate

231 cubic inches per gallon