A ready-to-use wood cleaner for Western Red Cedar, Redwood, Walnut, Mahogany, Southern Yellow Pine, Douglas Fir, Spruce and Cypress. Cedar Wash removes wood extractives, resin oils, dirt, dust, and pollen from bare wooden surfaces. These blemishes may interfere with adhesion of exterior stains. Cedar Wash should only be used on bare wood surfaces for stain preparation. Cedar Wash will not harm existing wood finish, chinking or sealants.

Recommended Application Methods

Pump sprayer

Surface Preparation

Do not use steel wool or wire brush, Osborn brush recommended

Application Temperature

40° to 90°F

Special Instructions

Only use on bare wood

Apply from bottom upward
*Rinse from top down
Do NOT allow Cedar Wash to dry on wood!
Avoid applying product in direct sunlight

Dry Time

Dries within 15- 20 minutes depending on humidity and temperature
*Do NOT allow Cedar Wash to dry on wood!
Complete dry time may take up to 24 hours


Coverage Rate

175 - 225 square feet per gallon