There are many ways to remove finish from a log home. Methods such as media blasting can be tedious and a hassle to clean up. StripIt is a water-based, non-hazardous pH neutral finish remover that professionals trust. StripIt is capable of removing multiple layers in a single application, without darkening/discoloring the wood or raising the grain. With no harsh chemicals, StripIt finish remover will not harm chinking or sealants, and is biodegradable! Use indoors and outdoors!

Recommended Application Methods

Brush
Airless sprayer

Surface Preparation

Surface must be clean and dry
Mildew and mold free
Do not use products containing chlorine bleach

Application Temperature

55° to 90°F

Special Instructions

Start application from bottom and work upward
Rinse thoroughly from top-down
Protect from freezing
Allow StripIt to sit for several hours for low solids stains
Allow StripIt to sit for 24 hours for high solids stains
Some removals may take multiple days and coatings for full removal

Dry Time

Keep from drying!
If StripIt dries, re-apply then cover with plastic or paper

Coverage Rate

45 - 55 square feet per gallon