

S-100 is the finish remover that professionals trust to get back to the basics. S-100 Finish Remover is a water-based solvent that’s easy to use and removes most types of finishes, whether oil or water-based! S-100 is a gel and can be applied using a brush or airless sprayer. After S-100 has softened the existing finish, simply pressure wash to remove. No need to worry about contaminating the surrounding soil, S-100 is biodegradable.
5 Gallon Pail covers approximately 250-500 square feet.
Recommended Application Methods
Brush
Surface Preparation
Surface must be clean and dry
Application Temperature
40° to 90°F
Special Instructions
Apply from bottom to top
Rinse from top to bottom
Rinse thoroughly
Dry Time
Dry to the touch in four to six hours
Complete cure time may take 72 hours depending on humidity and temperature.
Coverage Rate
50 - 100 square feet per gallon
S-100 Finish Remover
$250.99